Tabletop Glass

Measure
Once we have provided a quote based on the customers indicative measurements we are happy to work from the customers own measurements or come out and “check” measure to ensure a perfect fit for your tabletop.

Glass
Citiwest Glass uses only either Australian made Viridian 6mm, 8mm, 10mm, 12mm and 15mm Clear glass.

Cut
Exact measurements that take into account any shaped table are programmed into our automated Botero cutting table.

Polish and cutouts
Once the glass has been cut the sharp edges are polished down on a Bavelloni flat line edge polisher or shapepolisher or we can even handpolish if necessary.

Quality Assurance
The glass is then carefully cleaned and washed and checked for any blemishes in the glass and/or caused by the manufacturing process. Each panel is checked against the drawings and given a final sign off.

Toughen
For tabletops that do not rest flat on another surface toughened glass must be used. Citiwest Glass can produce “A” Grade Safety glass in the Glass Tempering Furnace onsite.

Install
The final step is placing the glass tabletop in position. Our experienced and qualified glaziers will clean and carefully place your tabletop in position. Final payment is not expected until you have reviewed and are happy with the finished product.